Call us now
1300 721 733
Treading products
Treading products
Treading products
is a silicone coated, sterile, absorbent polyurethane foam dressing with superabsorbent stripes to additionally absorb and lock wound exudate. The wound contact surface allows adherence to the periwound skin but not to the moist wound bed or newly formed epithelial tissue.
- Gentle to wound bed
-
Water-repellent and breathable backing
- Can be cut to size
Intended Purpose
Indications: The Cutimed Siltec assortment is indicated for exuding wounds such as: venous and arterial ulcers, pressure ulcers, diabetic foot ulcers, surgical incisions, skin grafts and donor sites, lacerations or abrasions. Cutimed Siltec is recommended for wounds with low to high exudate levels.
Wear time: Cutimed Siltec can remain in place for up to 7 days, depending on wound conditions and saturation of wound dressing. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
Product benefits
Gentle to wound bed
The perforated silicone wound contact layer prevents adherence to newly formed tissue, protects wound margins and ensures atraumatic, pain-reduced dressing changes.
Water-repellent and breathable backing
The outer film is bacteria proof, water-repellent and ensures proper fluid evaporation for changing stages of saturation.
Can be cut to size
The dressing can also be cut to size, making it as comfortable for the patient as possible.
Reliable exudate management
The vertical absorption makes sure exudate is taken up reliable and kept inside the dressing – even under compression. Superabsorbent stripes additionally support the absorption capacity.
Skin-friendly
The dressing has a low potential for skin irritations and allergies.
How to use
1. Clean the wound and your hands according to good clinical practice. If you are unsure how to clean the wound appropriately, please contact your health care professional for further instructions.
2. Make sure, the surrounding skin is dry.
3. Choose an appropriate dressing size that covers the wound and overlaps the wound edges. (A)
4. Open the pouch and take out the dressing. Please ensure, that the pouch is not opened or damaged.
5. Remove protective film (B) and apply with the adherent side towards the wound. (C)
6. Avoid stretching the dressing.
7. Apply additional dressing fixation.
8. Cutimed Siltec may be used on in infected wound in addition to antimicrobial therapy under medical supervision.
9. If necessary, Cutimed Siltec can be used in combination with other dressings e.g., Cutimed Sorbact/Sorbact (in case of infected wounds).
10. Cutimed Siltec can remain in place for up to 7 days, depending on wound conditions and saturation of wound dressing. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
How to remove
11. Carefully remove any additional dressing fixation and gently remove Cutimed Siltec from the wound and discard.
12. If required, cleanse the wound prior to application of a new dressing.
| Product Code | Product Description | Size |
| 73285-00 | Cutimed Siltec Silicone Foam Dressings Sterile | 5cm x 6cm |
| 73285-01 | Cutimed Siltec Silicone Foam Dressings Sterile | 10cm x 10cm |
Cutimed
Cutimed Siltec Silicone Foam Dressings Sterile, Box of 10 (5cm x 6cm / 10cm x 10cm)ESS_73285-00_10
is a silicone coated, sterile, absorbent polyurethane foam dressing with superabsorbent stripes to additionally absorb and lock wound exudate. The wound contact surface allows adherence to the periwound skin but not to the moist wound bed or newly formed epithelial tissue.
- Gentle to wound bed
-
Water-repellent and breathable backing
- Can be cut to size
Intended Purpose
Indications: The Cutimed Siltec assortment is indicated for exuding wounds such as: venous and arterial ulcers, pressure ulcers, diabetic foot ulcers, surgical incisions, skin grafts and donor sites, lacerations or abrasions. Cutimed Siltec is recommended for wounds with low to high exudate levels.
Wear time: Cutimed Siltec can remain in place for up to 7 days, depending on wound conditions and saturation of wound dressing. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
Product benefits
Gentle to wound bed
The perforated silicone wound contact layer prevents adherence to newly formed tissue, protects wound margins and ensures atraumatic, pain-reduced dressing changes.
Water-repellent and breathable backing
The outer film is bacteria proof, water-repellent and ensures proper fluid evaporation for changing stages of saturation.
Can be cut to size
The dressing can also be cut to size, making it as comfortable for the patient as possible.
Reliable exudate management
The vertical absorption makes sure exudate is taken up reliable and kept inside the dressing – even under compression. Superabsorbent stripes additionally support the absorption capacity.
Skin-friendly
The dressing has a low potential for skin irritations and allergies.
How to use
1. Clean the wound and your hands according to good clinical practice. If you are unsure how to clean the wound appropriately, please contact your health care professional for further instructions.
2. Make sure, the surrounding skin is dry.
3. Choose an appropriate dressing size that covers the wound and overlaps the wound edges. (A)
4. Open the pouch and take out the dressing. Please ensure, that the pouch is not opened or damaged.
5. Remove protective film (B) and apply with the adherent side towards the wound. (C)
6. Avoid stretching the dressing.
7. Apply additional dressing fixation.
8. Cutimed Siltec may be used on in infected wound in addition to antimicrobial therapy under medical supervision.
9. If necessary, Cutimed Siltec can be used in combination with other dressings e.g., Cutimed Sorbact/Sorbact (in case of infected wounds).
10. Cutimed Siltec can remain in place for up to 7 days, depending on wound conditions and saturation of wound dressing. It is recommended to change the dressing every 24 hours initially, moving to less frequent changes as necessary.
How to remove
11. Carefully remove any additional dressing fixation and gently remove Cutimed Siltec from the wound and discard.
12. If required, cleanse the wound prior to application of a new dressing.
| Product Code | Product Description | Size |
| 73285-00 | Cutimed Siltec Silicone Foam Dressings Sterile | 5cm x 6cm |
| 73285-01 | Cutimed Siltec Silicone Foam Dressings Sterile | 10cm x 10cm |
Compare Products
| Price |
|---|
| SKU |
| Rating |
| Discount |
| Vendor |
| Tags |
| Weight |
| Stock |
| Short Description |
Compare Products
Need help
- Heading
- Heading
Description here